top of page

Cover Base is a camouflage base for covering and leveling nails.


  • Mildly acidic with a pH of 5-6.
  • Elastic and flexible.
  • High coverage of the natural nail due to high pigmentation.
  • May experience minimal shrinkage during wear due to its elasticity.
  • Medium consistency, self-leveling.
  • Provides wearability without peeling for 3-4 weeks.
  • Neutral smell.
  • Eliminates strong heating of the nail plate during polymerization, so it does not cause burning in the lamp.
  • Hypoallergenic.
  • Can be easily removed by filing or with a solution.
  • Does not run and self-levels quickly.
  • Requires a base layer of Rubber Base.
  • Not suitable for leveling long nails without prior strengthening.
  • Drying time in the lamp is 120 seconds.
  • Can be additionally heated to make the consistency thinner.
  • Lamp power for drying should be 48 W (must be an original lamp).
  • The basic rule when leveling is that the thickness should be 1-1.5 mm at the edge.
  • Thixotropic – becomes thinner during work with brush movements.

Application Method:

  • Removal.
  • Do not file the shape of the nail, or leave an extra 2 mm length which will be filed off after leveling.
  • Use a 220 grit file to lightly file the surface of the nail, lifting the scales of the nail plate, or use a 100 grit buffer.
  • Manicure.
  • If you work with removers, wash your hands with soap and water after using them.
  • Degreasing the nail. Two approaches are needed. Use 4 wipes, one wipe for 5 fingers. First approach: wipe the surface of the nail. Second approach: take an orange stick, wrap a wipe around it, and clean the cuticle area and sidewalls.
  • Dehydrator (optional).
  • Use a primer if desired. If the base for the substrate is sufficiently acidic, the primer is not necessary.
  • Apply a layer of Rubber Base Lunamoon. It is best applied with a flat gel brush. The movements should be rubbing. It is important to cover all the sidewalls of the nail. Cure for 30 seconds.
  • Remove stickiness.
  • Leveling. Cure in the lamp for 120 seconds.
  • Shape filing after leveling. This is necessary to create thickness at the edge, which will support the free edge.
  • Remove stickiness after filing.
  • Apply top coat and cure for 120 seconds. Do not wipe or touch it after curing, as this may result in loss of gloss. (Note: Product photos on the website may differ from the actual product.)

Camouflage Cover Base №20 13ml

11,90 €Price
    bottom of page