Tutti Frutti Base is a camouflaging base with colorful figures for covering and leveling nails.
Features:
Mildly acidic, with a pH of 5-6.
Elastic and flexible.
High coverage of natural nails due to its high pigmentation.
May experience minimal shrinkage during wear due to its elasticity.
Medium consistency, self-leveling.
Ensures wearability without chipping for 3-4 weeks.
Has a neutral smell.
Prevents excessive heating of the nail plate during polymerization, so it doesn’t cause burning in the lamp.
Hypoallergenic.
Easily removed by filing or with liquid remover.
Does not run and levels very quickly.
Requires an underlayer of Rubber Base.
Not suitable for leveling long nails without prior strengthening.
Curing time in the lamp is 120 seconds.
Can be additionally heated to make the consistency thinner.
Lamp power for curing — 48 W (must be an original lamp).
The main rule for leveling is that the thickness should be 1-1.5 mm at the edge.
Thixotropic — becomes thinner when working with a brush.
Application Method:
Removal.
Do not file the nail shape. Alternatively, leave an extra 2 mm of length, which will be filed and removed after leveling.
Buff the nail surface lightly with a 220-grit file to lift the scales of the nail plate or use a 100-grit buffer.
Manicure.
If you use removers, wash hands with soap and water after their use.
Degrease the nail. This should be done in two steps. Use 4 wipes, one for each set of 5 nails. First step: wipe the nail surface. Second step: take an orange stick, wrap it with a wipe, and clean the cuticle and sidewalls.
Dehydrator (optional).
Primer can be used optionally. However, if the base coat has sufficient acidity, the primer is not necessary.
Apply an underlayer of Rubber Base Lunamoon. It is best applied with a flat gel brush. The movements should be rubbing. It is important to cover all the sidewalls of the nail. Cure for 30 seconds.
Remove the tacky layer.
Leveling. Cure in the lamp for 120 seconds.
File the shape after leveling. This is necessary to create a thickness at the edge that will support the free edge.
After filing, remove the tacky layer.
Apply top coat and cure for 120 seconds. Do not wipe after curing, as it may lose its shine.
(Product photos on the website may differ from the actual product.)