Lurex Base is a camouflaging reflective base. When the flash is on, it begins to shine and looks magical because it contains glitter in its composition.
Features:
Mildly acidic with a pH of 5-6.
Elastic and flexible.
High coverage of the natural nail due to high pigmentation.
May experience minimal shrinkage during wear due to its elasticity.
Medium consistency, self-leveling.
Ensures wearability without chipping for 3-4 weeks.
Neutral odor.
Prevents significant heating of the nail plate during polymerization, thus avoiding burning sensation in the lamp.
Hypoallergenic.
Easily removed by filing or soaking.
Does not run and self-levels quickly.
Requires a base layer of Rubber base.
Not suitable for leveling long nails without prior strengthening.
Curing time in the lamp is 120 seconds.
Can be additionally heated to make the consistency even thinner.
Lamp power for curing is 48W (it must be an original lamp).
The main rule for leveling is that the thickness at the edge should be 1-1.5 mm.
Thixotropic - becomes thinner during work with brush movements.
Application method:
Removal.
Do not file the nail shape. Alternatively, leave an extra 2 mm length, which will be filed and removed after leveling.
Lightly file the nail surface with a 220 grit file, lifting the scales of the nail plate, or use a 100 grit buffer.
Manicure.
If you are using removers, wash your hands with soap and water after their use.
Degrease the nail. This should be done in two steps. Use 4 wipes. One wipe for 5 nails. First step - wipe the nail surface. Second step - take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and sinuses.
Dehydrator (optional).
Primer is used optionally. But if the base coat has sufficient acidity, then primer is not needed.
Apply a base layer of Rubber base Lunamoon. It is best applied with a flat gel brush. The movements should be rubbing. It is important to paint all the sinuses of the nail. Cure for 30 seconds.
Remove the stickiness.
Leveling. Cure in the lamp for 120 seconds.
Shape filing after leveling. This is necessary to form a thickness at the edge that will hold the free edge.
After filing, remove the stickiness.
Apply top coat and cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost. (Product photos on the website may differ from the actual product)